Insulation Underlay PUR 2.0
No longer available
This professional acoustic mat consists of mineral fillers and polyurethane binders. Pur 2.0 comes with walking sound reduction, low thermal resistance as well as integrated moisture protection are also impressive feautures.
Features
Walking Sound Reduction
Walking sound refers to the noises which are audible within the room. The unpleasant click-clack effect can be greatly reduced by selecting the correct underlay.
Impact Sound Reduction
Impact sound describes the noises that are heard in rooms below or adjacent. Depending on the material compound used in the underlay, impact sound can be reduced by up to 22 dB. Minimum EPLF requirement: IS ≥ 14 dB
Durability
Adequate pressure stability of the underlay is very important, particularly when laying click laminate floors. Minimum EPLF requirement: CS ≥ 10 kPa
Suitable for uneven floors
The floors are often uneven, especially in old buildings. These irregularities can be levelled out with the right add2 parquet underlay. EPLF requirement: PC ≥ 0.5 mm
Moisture Protection
For mineral substrates floor manufacturers prescribe the installation of a vapor barrier (PE foil). Some our products have an integrated vapour barrier, so you can do without such foil. EPLF requirement: SD ≥ 75 m
Specification
Length: | 7500 mm |
---|---|
Pack Pieces: | 1 |
Quantity per Pack: | 7.5 m² |
Subtitle: | Polyurethan and mineral fillers |
Thickness: | 2 mm |
Type: | Accessories |
Width: | 1000 mm |
Login